Secondary Water Drainage Layer Prevents Structural Damage

When it comes to sealing windowsills, there’s often uncertainty on construction sites – despite growing demand for professional execution.

Keeley Simon
in products
10. September 2025 2 minutes reading time

Many are unclear about the key requirements: the windowsill must have a slope of at least 5°, be resistant to driving rain – and most importantly, be properly connected.

In practice, things often look different: plastered façades frequently lack the necessary slope, and in ventilated façades, the façade membrane is sometimes simply pulled up and glued to the window. The result: water can accumulate, flow back into the structure – and cause cracks in the plaster, rot, or expensive consequential damage.

This is especially critical in timber construction – but even in other building methods, a secondary water drainage layer provides lasting protection for the structure. So why is it often forgotten? Many tenders omit it, and some believe: “No one’s going to pay for that.” Yet the Swiss SIA standard 331:2012, Article 2.1.4, already requires that all connections to the building envelope meet the same standards as the window itself – including resistance to driving rain, airtightness, and thermal insulation.

Two technical drawings show how it’s done correctly: in both cases – central window installation in a solid wooden wall with external or internal insulation – the secondary water drainage layer beneath the windowsill reliably protects the sensitive parapet zone from moisture ingress.

This is exactly where Fentrim IS 2 comes in. The self-adhesive membrane is applied directly beneath the windowsill in the direction of water flow and is approved for use from a slope of just 5°. Any penetrating water is effectively directed outward.

There is not yet an explicit standard requirement – but it’s coming. Those who already work with Fentrim IS 2 are not only protecting the structure, but also the quality of their own work.

Get expert advice now – and seal your windowsills securely and permanently. Your SIGA contact is happy to help.

Similar articles

Bertie Dixon in airtightness

Airtightness in Irish Building Regulations

Bertie Dixon in airtightness

Hands on. What can a bespoke in-office CPD offer to you?

Lenny Antonelli in airtightness , windtightness

How to pass an airtightness test, Part 1: design and build for airtightness

Bertie Dixon in airtightness

Find the right way: Irish Building Regulations (Part 2)

Bertie Dixon in airtightness , windtightness

Find your way through the labyrinth of UK building regulations

Bertie Dixon in culture , airtightness

How Kit Knowles is pushing the envelope for sustainable construction

Lenny Antonelli in windtightness

How to build a moisture-safe flat roof

Stefanie Schaller in airtightness

Hygrobrid® Membranes vs. Moisture Variable membranes

Bertie Dixon in airtightness , culture

Is this the last low energy house before Brexit?

Stefanie Schaller in airtightness , windtightness

The Mould Trap: Understanding Flank Diffusion